SyqeAir Inhaler Support

Contents of the package:

1. SyqeAir Inhaler
2. Mouthpiece
3. Mouthpiece cover
4. Electrical wall adaptor
5. Micro-USB cable
6. User Manual

Inhaler parts:

1. Mouthpiece
2. ON button
3. Plus (+) button
4. Cartridge compartment cover
5. Display screen
6. Light indicator (front)
7. Minus (-) button
8. Air intake
9. Inhalation light indicator (back)
10. ‘Open Cover’ button
11. Micro USB charging port

Prior to activating the inhaler:

• Insert the mouthpiece into the inhaler as indicated in the ‘Mouthpiece insertion instructions’
• Insert the cartridge as indicated in the ‘Cartridge insertion instructions’
• Select your preferred language as indicated in ‘Language selecting instructions’
• Inhalation training may be practiced without vaporization of the active ingredients.

The goal of the training is to assist you in learning how to inhale from the inhaler correctly.

Make sure that the battery is charged before using the inhaler. If the battery is deployed, charge it according to the instructions.

To activate the inhaler, press the ON button located at the front of the inhaler.

The ‘Opening’ screen will be displayed for a few seconds. Both indicator lights will turn white, and a single beep will be heard.

In the next 2 seconds, the inhalation light indicator will turn off, and the ‘Home’ screen will appear, displaying the number of remaining doses, dosage setting, and battery status.

1. Number of remaining doses
2.  Dosage indicator
3. Battery status

* The number of remaining doses indicator will blink when 5 doses or fewer remain.

* The Battery status indicator will blink when the battery is low.

Now you may select your preferable dosage using the plus (+) and minus (-) buttons.

The dosage may be changed from the Home screen only).

* Your dosage control ability depends on the Inhaler’s software version. For more information, please contact Customers Service.

To prepare a dose for inhalation, press the ON button once again. The ‘Ready to INHALE’ screen will be displayed, and the inhalation indicator light will turn green, as well as the front indicator light.

Begin inhalation.

Hard reset

Press and hold the ON button and the Minus button together for 10 seconds. Continue pressing until the inhaler turns on again. Then select a language and Training Mode, and the inhaler will return to normal.

Language selection

Press the Minus or Plus buttons shortly to open the language menu. Select the desired language with a short click on the ON button.

Entering Training Mode

The screen will display “Training Mode – Yes/No”. Click on the Plus button for “Yes” or on the Minus button for “No”. Clicking on the ON button will beep, and no language will be selected.

Turning device off

The inhaler turns off automatically after several seconds when left unused. The inhaler may also be turned off by holding the ON button for 4 seconds (Figure 2 (2)).