SyqeAir Inhaler Support

Do not store the inhaler without a mouthpiece inserted.

Do not use the same mouthpiece with more than 3 cartridges.

Do not turn or remove the mouthpiece during inhalation or when the inhaler is “ready for inhalation”. This action may cause damage to the inhaler.

Attention: make sure the mouthpiece is clean. If the mouthpiece is not clean, clean it according to the cleaning instructions for the mouthpiece.

Attention: wash your hands before inserting the mouthpiece into the Inhaler.

Attention: Ensure the mouthpiece is whole, intact, and undamaged before assembly. In case there is a defect in the mouthpiece, please contact Customer Service before use.

Open the mouthpiece box.

Take the mouthpiece out of the packaging.

Hold the mouthpiece at its upper part.

Insert the mouthpiece tube into the mouthpiece base found in the upper part of the inhaler when the gasket is facing the front of the inhaler.

1. Mouthpiece tube
2. Mouthpiece gasket
3. Mouthpiece base

After the mouthpiece is completely inserted, turn the mouthpiece 90 degrees clockwise until it stops.

If the mouthpiece is not in place, a ‘Mouthpiece not in place’ screen will appear (Figure 5), and the front indicator light will turn orange.

In this case, remove the mouthpiece according to the instructions in the following topic.

Turn the mouthpiece on its upper part (over the dots, see Figure 6) 90 degrees counterclockwise until it stops.

Hold the mouthpiece and gently pull upwards until it is completely removed.