SyqeAir Inhaler Support

During first-time use and/or after hard resetting the inhaler, you may perform a short inhalation training session to help you learn the optimal method for inhaling from the SyqeAir Inhaler.

Attention: the training inhalations are for training purposes only, and no active ingredient is transferred to you during these inhalations.

Attention: make sure the battery is charged before using the inhaler. If the battery is not charged, charge it according to the instructions.

Following language selection, the Training Mode Selection screen appears; at this point, you should select ‘Yes’ if you wish to perform a training inhalation session.

For confirmation and operation of training mode, press the plus (+) button. To continue without the training mode, press the minus (-) button. After confirmation of the training mode, the ‘Training Mode activated’ screen will appear. Throughout the training mode, the front indication light will turn purple, and an asterisk symbol (i.e., *) will appear in the upper left corner of the screen.

The ‘Ready to INHALE’ [training] screen will now appear. Training mode consists of 4 training inhalations and will display in which of the 4 inhalations you are currently at.

To exit the training mode at any stage, hold the ON button pressed for 4 seconds until the inhaler shuts off. To activate the inhaler again, repeat the instructions in sections 10.1-10.3.

Exhale before performing an inhalation.

After exhaling, place your lips on the mouthpiece and inhale in a uniform manner for approximately 3 seconds. Towards the end of the inhalation, you will feel resistance in the airflow, but do not stop inhaling until the inhalation indicator light turns off.

The inhaler indicator light will turn off at the end of a successful inhalation, and the ‘SUCCESSFUL Inhalation’ [training] screen will appear.

In the event the inhalation was unsuccessful, 3 beeps will be heard, the inhalation indicator light will turn orange, and one of the following screens will appear:

A. ‘Weak training inhalation’ screen

Meaning – Attention, Weak inhalation. How to improve the quality of the inhalation? Inhale at a steady pace.

B. ‘Short training inhalation’

screen Meaning – Attention, the inhalation period is shorter than 3 seconds. How can the quality of the inhalation be improved? In the next inhalation, inhale at a steady pace for 3 seconds until the indicator light on the back of the inhaler turns off.

 C. ‘Forceful training inhalation’ screen

Meaning – Attention, Inhalation is too forceful. How can the quality of the inhalation be improved? Inhale at a steady pace and force.

   D. ‘Unsteady training inhalation’ screen

Meaning – Attention, the inhalation is not uniform. How can the quality of the inhalation be improved? Inhale at a steady rate for 3 seconds until the green light on the back of the inhaler turns off.

After completing 4 training inhalations, the ‘Repeat training’ screen will appear, and you may select either to activate additional training or to continue using without further training.